28
GETTING TO KNOW YOUR VEHICLE
UCONNECT VOICE RECOGNITION QUICK TIPS
I
NTRODUCING
U
CONNECT
Start using Uconnect Voice Recognition (VR)
with these helpful quick tips. It provides the key
Voice Commands and tips you need to know to
control your Uconnect system.
NOTE:
The NAV icon on the bottom bar, or in the Apps
menus, of your touchscreen, shows you have
the Uconnect 4C NAV system. If not, you have a
Uconnect 4C system.
Voice Recognition
B
ASIC
V
OICE
C
OMMANDS
The basic Voice Commands below can be given
at any point while using your Uconnect system.
Push the VR button . After the beep, say:
“Cancel” to stop a current voice session
“Help” to hear a list of suggested Voice
Commands
“Repeat” to listen to the system prompts
again
Notice the visual cues that inform you of your
voice recognition system’s status. Cues appear
on the touchscreen.
G
ET
S
TARTED
The VR button is used to activate/deactivate
your VR system.
Helpful hints for using VR:
Reduce background noise. Wind and
passenger conversations are examples of
noise that may impact recognition.
Speak clearly at a normal pace and volume
while facing straight ahead.
Each time you give a Voice Command, you
must first push the VR button, wait until after
the beep, then say your Voice Command.
You can interrupt the help message or
system prompts by pushing the VR button
and saying a Voice Command from the
current category.
Uconnect Voice Command Buttons
1 — Push To Start Or Answer A Phone Call And
Send Or Receive A Text
2 — Push The VR Button To Begin Radio, Media,
And Climate Functions
21_LX_OM_EN_USC_t.book Page 28