Chrysler 300 2021 Скачать руководство пользователя страница 206

Страница: 206 / 312

204

SAFETY

1. Place the child seat in the center of the

seating position. If the second row seat can

be reclined, you may recline the seat and/or

raise the head restraint (if adjustable) to get

a better fit. If the rear seat can be moved

forward and rearward in the vehicle, you may

wish to move it to its rear-most position to

make room for the child seat. You may also

move the front seat forward to allow more

room for the child seat.

2. Pull enough of the seat belt webbing from

the retractor to pass it through the belt path

of the child restraint. Do not twist the belt

webbing in the belt path.

3. Slide the latch plate into the buckle until you

hear a “click.”

4. Pull on the webbing to make the lap portion

tight against the child seat.

5. To lock the seat belt, pull down on the

shoulder part of the belt until you have

pulled all the seat belt webbing out of the

retractor. Then, allow the webbing to retract

back into the retractor. As the webbing

retracts, you will hear a clicking sound. This

means the seat belt is now in the Automatic

Locking mode.

6. Try to pull the webbing out of the retractor.

If it is locked, you should not be able to pull

out any webbing. If the retractor is not

locked, repeat step 5.

7. Finally, pull up on any excess webbing to

tighten the lap portion around the child

restraint while you push the child restraint

rearward and downward into the vehicle

seat.

8. If the child restraint has a top tether strap

and the seating position has a top tether

anchorage, connect the tether strap to the

anchorage and tighten the tether strap. See

page 204 for directions to attach a tether

anchor.

9. Test that the child restraint is installed

tightly by pulling back and forth on the child

seat at the belt path. It should not move

more than 1 inch (25.4 mm) in any

direction.

Any seat belt system will loosen with time, so

check the belt occasionally, and pull it tight if

necessary.

Installing Child Restraints Using The Top

Tether Anchorage:

1. Look behind the seating position where you

plan to install the child restraint to find the

tether anchorage. You may need to move

the seat forward to provide better access to

the tether anchorage. If there is no top

tether anchorage for that seating position,

move the child restraint to another position

in the vehicle if one is available.

WARNING!

Do not attach a tether strap for a rear-facing

car seat to any location in front of the car

seat, including the seat frame or a tether

anchorage. Only attach the tether strap of a

rear-facing car seat to the tether anchorage

that is approved for that seating position,

located behind the top of the vehicle seat.

See

page 198 for the location of approved

tether anchorages in your vehicle.

21_LX_OM_EN_USC_t.book Page 204

Содержание 300 2021

























































































































































































































































































































Результаты поиска

Содержание 300 2021

Отзывы:

Похожие инструкции для 300 2021

Бренды по названию

Популярные бренды

Chrysler 300 2021, Руководство пользователя

Результаты поиска

Содержание 300 2021

Отзывы:

Похожие инструкции для 300 2021

Бренды по названию

Популярные бренды