Chrysler 2005 Sebring Скачать руководство пользователя страница 96 | Manualshive

Страница: 96 / 291

Chrysler 2005 Sebring Скачать руководство пользователя страница 96

Control Buttons

Step Button

Use this button to choose or cycle through the five trip
conditions.

Reset

The following trip conditions can be reset:

•

AVG ECO (changes to present fuel economy)

•

ODO

•

ET

To reset only the trip condition currently displayed, press
and release the STEP and US/M buttons simultaneously
until a chime sounds. To reset all trip conditions, hold
down the STEP and US/M buttons simultaneously
(about 2 seconds) until a second chime sounds and then
release the buttons.

NOTE:

The screen must display one of the trip condi-

tions above in order to reset either (or all) of these
conditions.

US / M Button

Use this button to change the display from U.S. to metric
measurement units.

Trip Conditions

Average Fuel Economy (AVG ECO)

This display shows the average fuel economy since the
last reset.

Estimated Range (DTE)

This display shows the estimated distance that can be
traveled with the fuel remaining in the tank. This esti-
mated distance is based on the most recent trip informa-
tion: (Average Fuel Economy) x (Fuel Remaining)

This display cannot be reset.

Present Fuel Economy (ECO)

This display shows fuel economy for the last few sec-
onds.

This display cannot be reset.

96

UNDERSTANDING YOUR INSTRUMENT PANEL

«
...
94
95
96
97
98
...
»

Содержание 2005 Sebring




































































































































































































































































































Отзывы:

Нет отзывов