Chrysler 2005 Sebring Скачать руководство пользователя страница 34 | Manualshive

Страница: 34 / 291

Chrysler 2005 Sebring Скачать руководство пользователя страница 34

Driver and Right Front Passenger Supplemental
Restraint System (SRS) - Airbag

This vehicle has front airbags for both the driver and
front passenger as a supplement to the seat belt restraint
systems. The driver’s airbag is mounted in the center of
the steering wheel. The passenger’s front airbag is
mounted in the instrument panel, above the glove com-
partment. The words SRS AIRBAG are embossed on the
airbag covers.

This vehicle may also be equipped with left and right
window bags to protect the driver and passengers sitting
next to a window. If the vehicle is equipped with window
bags, they are located above the side windows. Their
covers are also labeled SRS AIRBAG.

NOTE:

Airbag covers may not be obvious in the

interior trim; but they will open to allow airbag deploy-
ment.

Front Airbag Components

Window Airbag

34

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

«
...
32
33
34
35
36
...
»

Содержание 2005 Sebring




































































































































































































































































































Отзывы:

Нет отзывов