Chrysler 2005 PT Cruiser Convertible Скачать руководство пользователя страница 54 | Manualshive

Страница: 54 / 368

Chrysler 2005 PT Cruiser Convertible Скачать руководство пользователя страница 54

•

Rearward-facing child seats must

NEVER

be used in

the front seat of a vehicle with a front passenger
airbag. An airbag deployment could cause severe
injury or death to infants in this position.

•

Children who weigh more than 20 lbs (9 kg) and who
are older than one year can ride forward-facing in the
vehicle. Forward-facing child seats and convertible
child seats used in the forward-facing direction are for
children who weigh 20 to 40 lbs (9 to 18 kg) and who
are older than one year. These child seats are also held
in the vehicle by the lap/shoulder belt or the LATCH
child restraint anchorage system.

•

The belt-positioning booster seat is for children weigh-
ing more than 40 lbs (18 kg), but who are still too small
to fit the vehicle’s seat belts properly. If the child
cannot sit with knees bent over the vehicle’s cushion
while the child’s back is against the seat back; they
should use a Belt Positioning Booster Seat. The child
and booster seat are held in the vehicle by the lap/
shoulder belt. (Some booster seats are equipped with a
front shield and are held in the vehicle by the lap
portion.)

NOTE:

For additional information refer to www.nhtsa-

.dot.gov or www.seatcheck.org.

54

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

«
...
52
53
54
55
56
...
»

Содержание 2005 PT Cruiser Convertible

















































































































































































































































































































































































Отзывы:

Нет отзывов