Chrysler 2005 PT Cruiser Convertible Скачать руководство пользователя страница 127 | Manualshive

Страница: 127 / 368

Chrysler 2005 PT Cruiser Convertible Скачать руководство пользователя страница 127

To adjust the crossbars with botton style releases, depress
the button and slide the crossbar to the next locking
position. Alternate sides until the crossbars are posi-
tioned correctly for your cargo and the stanchions are
locked square to the slide rails.

External racks do not increase the total load carrying
capacity of the vehicle. Be sure that the total occupant
and luggage load inside the vehicle, plus the load on the
luggage rack, do not exceed the rated vehicle capacity.

NOTE:

When the luggage rack is not in use, place the

crossbars together at the rear of the vehicle. In this
position they are designed to improve the vehicle aero-
dynamics and reduce wind noise.

CAUTION!

To avoid damage to the roof rack and vehicle, do not
exceed the maximum roof rack load capacity of 150
lbs (68 kg). Always distribute heavy loads as evenly
as possible and secure the load appropriately.

Long loads which extend over the windshield, such
as wood panels or surfboards, should be secured to
both the front and rear of the vehicle.

Travel at reduced speeds and turn corners carefully
when carrying large or heavy loads on the roof rack.
Wind forces, due to natural causes or nearby truck
traffic, can add sudden upward loads. This is espe-
cially true on large flat loads and may result in
damage to the cargo or your vehicle.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

127

3

«
...
125
126
127
128
129
...
»

Содержание 2005 PT Cruiser Convertible

















































































































































































































































































































































































Отзывы:

Нет отзывов