Chrysler 2004 Crossfire Скачать руководство пользователя страница 85

Страница: 85 / 251

Security

If you sell your vehicle, be sure to erase the frequencies.

To erase all of the previously programmed frequencies,
hold down both outside buttons until the light begins to
flash.

This device complies with part 15 of FCC rules and with
RS-210 of Industry Canada. Operation is subject to the
following conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference that may be
received, including interference that may cause undes-
ired operation.

NOTE:

Changes or modifications not expressly ap-

proved by the party responsible for compliance could
void the user’s authority to operate the equipment.

HomeLink

is a trademark owned by Johnson Controls,

Inc.

UMBRELLA HOOK

Your Crossfire is equipped with an umbrella hook. This
feature is located behind and between the two seats, just
above the map pocket.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Содержание 2004 Crossfire




























































































































































































































































Результаты поиска

Содержание 2004 Crossfire

Отзывы:

Chrysler 2004 Crossfire, Руководство пользователя, Страница: 85 / 251

Результаты поиска

Содержание 2004 Crossfire

Отзывы: