Chrysler 2004 Crossfire Скачать руководство пользователя страница 16

Страница: 16 / 251

2. This device must accept any interference that may be
received, including interference that may cause undes-
ired operation.

Transmitter Battery Service

The recommended replacement Lithium battery is Pana-
sonic

CR 2025 or equivalent.

To change the batteries:

•

Press release button (2) on the key fob. The key folds
out.

•

Press the battery cover (1) in the direction of the arrow.

•

Remove the old batteries.

•

Insert the new batteries in the direction of the arrow
with the positive symbol facing upwards.

•

Replace the battery cover and press on it until you feel
it engage.

NOTE:

Only replace the batteries in pairs.

The system may have to be resynchronized if the trans-
mitter is without voltage for several minutes. To synchro-
nize, aim the transmitter eye at the vehicle and briefly
press either the Lock or the Unlock button twice. Within

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Содержание 2004 Crossfire




























































































































































































































































Результаты поиска

Содержание 2004 Crossfire

Отзывы:

Chrysler 2004 Crossfire, Руководство пользователя, Страница: 16 / 251

Результаты поиска

Содержание 2004 Crossfire

Отзывы: