Chromcraft HCU 83, Руководство по эксплуатации

Страница: 8 / 14

HAND CONTROLLER UNIT #83 FUNCTIONS for JK180-2T MECHANISM
LCD SCREEN notes positions in bottom of screen
MEMORY M1, M2, M3: PRESS & HOLD BUTTON FOR 3
SECONDS. ONCE LCD CONFIRMS OR MESSAGE SAYS,
“SAVED M1,M2 OR M3 POSITION SUCCEED”, THEN IT
REMEMBERS THIS PRE- SET POSITION.
CUSTOM CONTROL:
•
PRESS AND HOLD OR FOR HEADREST POSITION.
•
PRESS AND HOLD OR FOR FOOTREST POSITION
•
PRESS AND HOLD OR FOR RECLINE BACK POSITION
HOME: PRESS AND RELEASE. GOES TO
ORIGINAL PRE-SET HOME POSITION
.
RECLINE: PRESS AND RELEASE. GOES INTO
RECLINE TV SETTING POSITION.
ZERO GRAVITY: PRESS AND RELEASE. GOES INTO
RELAXED POSITION OF BODY AT 127 D/- 7
FOR ZERO GRAVITY.
USB PORT on top to charge phone, Pad, etc.
NOTICE
M2 M3
M1
83
IF YOU PRESS ANY BUTTON DURING PRE-SET MOVEMENT POSITION, THE
OPERATION STOPS. CAN BE USED FOR EMERGENCY TO STOP OPERATION.
NOTICE
WHEN POWER GOES OFF OR WHEN
UNPLUGGED FROM WALL OUTLET, YOU
MUST RE-ACTIVATE THE FOLLOWING STEPS:
1) PRESS HOME BUTTON, GO FULLY INTO POSITION.
2) PRESS HOME AGAIN, GO INTO FULL POSITION.
3) SYSTEM RE-ACTIVATED
8