Chromcraft HCU 83, Руководство по эксплуатации

Страница: 12 / 14

HCU #83 for 3 motor system – JK180-2T with JK1158 headrest
ELECTRICAL CONNECTIONS AND PARTS:
Step 1 - plug hand controller wire to control box. Match #1 to #1.
Step 2 - plug the black wire from the wire of main motor #2 to the control box marked #2.
Step 3 - plug the blue wire from the wire of back rest motor #3 to the control box marked #3.
Step 4 - plug the power cord into the power adaptor from the control box.
Step 5 - plug headrest motor black wire to black wire connector from control box.
Step 6 – then plug into wall outlet with the transformer low voltage plug.
Power
adaptor
with back up
batteries,
then plug
into wall
outlet with
the
transformer
low voltage
plug
Control
box
Hand controller
unit- HCU #83
Step 6
Pull HCU in center of
seat & pull down into
the center back before
back rest is applied and
locked down.
Step 1
Step 2
Step 3
Step 4
Step 5
Note: match up color
coded wires of blue and
black with its connectors.
8 foot long
43”long
Unwind
2400mm
or 94” long
12