Studio One 100 T User Manual
14
V1.0 September 2015
www.chroma-q.com
4.
Specification
4.1
Technical Specifications
Product Code
CHSONE100T
Net Dimensions**
(Without Fixings - Width x
Height x Depth)
214mm x 267mm x 232mm / 8.5" x 10.5" x 9" (Full open yoke)
Net Weight (Without Fixings)
3.8 kg / 8.5 lb
Shipping Dimensions –
Width x Height x Depth
406mm x 228mm x 292mm / 16" x 9" x 11.5"
Shipping Weight
5.5 kg / 12 lb
Power & Connections
Power Supply
Built-in
Power Input Rating
100-240V AC 50-60Hz 125VA
Power Factor
0.5
Power Consumption
60W @ 120V AC; 61W @ 230V AC
Inrush Current
15A @ 120V AC; 36A @ 230V AC
Idle Power Consumption
3W @ 120V AC; 5W @ 230V AC
Typical Power & Current
Measurements done with all LEDs at maximum intensity. Measurements made at nominal voltage.
Allow for a deviation of +/- 10%.
Power connector In/Out
powerCon
Data Connectors In/Out
XLR 5-pin
Control Protocol
ANSI E1.11 USITT DMX 512-A
Cooling System
Convection
Operating Temperature
0°C to 40°C
Construction
Cast machined aluminium
Colour
Black (custom colours available on request)
Built-In Hardware
Split yoke, 6.25” Accessory Holder
IP Rating
IP20
Approvals
CISPR 15/EN55015& EN61547, FCC Part 15 Subpart B:2012 /
ICES-003:2012, CSA C22.2, UL 1573, IEC 60598
Control & Photometric
LED Engines
1
LEDs Per Engine
Warm White
Control Modes
1 channel Dimmer, Master, Slave
Dimming Curve
Theatrical
Wireless Control
On / Off, Fade In, Fade Out
Hot Lumen Output (Combined)
2,200
Optics
Fully Homogenised
Beam Angle
18° (approx)
Beam Distribution
Symmetrical direct illumination
CCT
3,000K (+/- 200K)
CRI
82
Lamp Life
L70 at 50,000 hours
**
For exact measurements please refer to the line drawings below
