Chroma 641-4000, Руководство пользователя

Страница: 5 / 37

Studio Force II User Manual V1.1 4 Aug. 2019
www.chroma-q.com
PROTECTION FROM ELECTRIC SHOCK
•
Use only the cables specified in this manual and on the Chroma-Q website at
www.chroma-q.com to interconnect devices in the installation. If the specified cables
are not long enough for an intended cable run, consult Chroma-Q for assistance in
finding or creating a safe alternative solution.
•
Provide a means of locking out AC mains power that allows power to the installation to
be shut down and made impossible to reapply, even accidentally, during work on the
installation.
•
Shut down power to the installation during service and when it is not in use.
•
Before applying power to the installation, check that all power distribution equipment
and cables are in perfect condition and rated for the current requirements of all
connected devices.
•
Isolate the installation from power immediately if any product, power cable or power
plug is in any way damaged, defective or wet, or if it shows signs of overheating.
•
Do not immerse a Chroma-Q Studio Force II TM fixture in water or expose it to high-
pressure water jets.
PROTECTION FROM BURNS AND FIRE
•
The Studio Force II TM is designed to be cooled by forced air convection. Provide free
airflow around the fixture and a minimum clearance of 10 mm (0.4 in.) in all directions.
•
Do not operate the Studio Force II TM if the ambient operating temperature exceeds 40°
C (104°F).
•
Do not modify the Studio Force II TM in any way not described in this manual or install
other than genuine Chroma-Q parts. Use only accessories approved by Chroma-Q.
PROTECTION FROM INJURY
•
Ensure that the installation hardware and supporting surface or structure can hold at
least 10 times the weight of all the devices they support.
•
Block access below the work area and work from a stable platform whenever installing,
servicing or moving the Studio Force II TM .
•
As soon as work is completed, check that all hardware and components are securely
fastened to supporting structures.
•
Make sure there are no flammable materials close to the product during operation.
•
Make sure the power cord is not crimped or damaged.
•
Avoid direct eye exposure to the light source while the product is on.
•
Never try to repair the product. Repairs carried out by unskilled people can lead to
damage or malfunction and/or invalidate your warranty. Please contact the nearest
authorized dealer or contact
support@chroma-q.com .
Keep this User Manual for future consultation. If this product is used by another
user, be sure that they also receive this document.