Chroma 641-4000, Руководство пользователя

Страница: 11 / 37

Studio Force II User Manual V1.1 10 Aug. 2019
www.chroma-q.com
the standard optics. The output beam angle with Border Lens is 43 o x 43 o and with CYC Lens , 80 o x35 o . This
can be seen in Figure 4 <<add proper reference for figure>>>
Figure 4 (Beam Angle)
Spring Plungers are pre-installed at the far ends of the accessory slot to lock in-place the slide-in panels. The
height of the spring plungers is pre-set at the factory and requires no further adjustment.
Figure 5 (Optional slide-in lenses)
2.5. Control
Studio Force II TM fixture can operate as a stand-alone unit or can be controlled remotely via ANSI E1.11
USITT DMX 512-A protocol. The control function settings can be accessed through the touchscreen LCD
display at the rear of the fixture.
Power-up Screen:
No Power Menu Access:
Insert a small blunt object, such
as a paperclip, into the hole to
turn the display ON and
configure the fixture when it is
not connected to the AC mains
power.
Press and hold for
5 sec to unlink from
a Lumenradio RF
transmitter
.
Figure 6 (Start-up Screen)
Tap on Focus
button to turn ON
the fixture for 30
sec
.