Chroma 63200A Series, Инструкция по эксплуатации и программированию

Страница: 16 / 141

Overview
1-1
1. Overview
Introduction 1.1
This manual describes the specifications, installation, and programming of 63200A Series
High Power Electronic Loads.
Description 1.2
The functions of 63200A Series Electronic Loads are the same except the input voltage, load
current and operable power. All models can be operated under basic and advanced loading
modes.
Figure 1-1 63205A-150-500 DC Electronic Load
Features 1.3

CC (Constant Current), CR (Constant Resistance), CV (Constant Voltage), CP
(Constant Power), CCD (Constant Current Dynamic) and CRD (Constant Resistance
Dynamic) operating modes.

Programmable slew rate, load levels, load periods and conduct voltage (Von).

Programmable dynamic loading with speed up to 50kHz (limited by Minimum Rise
Time.)

Minimum input resistance, allows load to sink high current even with low input voltage
(see SPEC.)

Selective voltage and current ranges.

Remote sensing capability.

256 sets of memories to save/recall user-definable setups.