Troubleshooting
For assistance with common issues, refer to the following troubleshooting topics.
If you cannot resolve your issue with the information provided, contact Christie Technical Support.
The speaker does not function
The speaker is connected to the amplifier, but is not producing any sound.
Resolution
•
Verify that the speaker is receiving an input signal from the amplifier.
•
Verify that the circuit breaker for the main circuit to the amplifier is closed.
•
Verify that amplifier is powered on and attenuators or gain controls are at nominal settings.
•
If open, reset the circuit breaker. If the AC mains breaker continues to open, check the voltage
and amperage of the circuit.
•
Verify that the speaker wires are correctly connected to the input terminals on the speaker and
the terminals on the amplifier.
The speaker sound is degraded
The speaker is receiving a signal and sound is being output, but it is distorted.
Resolution
•
Visually inspect the speaker for deterioration or holes.
•
Ensure that the input signal to the amplifier is clean.
•
Verify that attenuators or gain controls on amplifies and any audio processors are at nominal
settings.
•
Verify that the speaker wires from the speaker are securely connected to the terminals on the
amplifier.
•
Verify that the speaker wires are correctly connected to the input terminals on the speaker.
•
Verify there are no loose or missing screws. Replace all screws you removed during
installation.
•
Have an authorized dealer complete an audio test (for example, pink noise, frequency sweeps,
and content and program material).
Christie Vive Audio LS1/LS2 Line Source Speakers User Manual
17
020-102170-01 Rev. 1 (06-2016)
Copyright
©
2016 Christie Digital Systems USA Inc. All rights reserved.
