manualshive.com logo in svg

Christie Vive audio LS1, Руководство пользователя

Поделиться
Скачать
Christie Vive audio LS1 Скачать руководство пользователя страница 14

5. Hang the speaker.

Flying the speaker horizontally

The speaker is flown, according to installer best practices, using four rigging cables and any legally

required redundant safety cables.

Flying a speaker should only be done by qualified rigging professionals in accordance with local
requirements and regulations.

1. Place the speaker on a flat stable surface on its back.
2. Remove the 24 M5 screws and lock washers from the waveguide.

 

 

3. Carefully pull the waveguide away from the cabinet, making sure to not strain the connecting

wires.

4. Rotate the waveguide 90 degrees clockwise.
5. Insert the waveguide into the cabinet.

 

 

6. Secure the waveguide with the 24 screws and lock washers removed in step 1.
7. Turn the cabinet horizontally.
8. Remove the four pre-installed M10 flat head bolts from the top of the speaker.
9. Insert and secure the four eye-bolts.

Installation

Christie Vive Audio LS1/LS2 Line Source Speakers User Manual

14

020-102170-01 Rev. 1 (06-2016)

Copyright 

©

 2016 Christie Digital Systems USA Inc. All rights reserved.

Содержание Vive audio LS1























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды