8. Secure the projector to the base plate using four hex socket head screws and washers
provided with frame.
•
For H Series and HS series projectors, use M8 x 1.25 x 40 mm bolts and washers and
secure with a 6 mm hex key.
The M8 bolts must be tightened to a torque of 38 Nm.
•
For GS Series 630/635 GS Series, DWU6322-GS, and DWU7062-GS projectors, use M6 x
1.0 x 35 mm bolts and washers.
The M6 bolts must be tightened to a torque of 16 Nm.
•
For GS Series 1075, GS Series 850/700, DWU1082-GS, and DWU8902-GS projectors, use
M6 x 1.0 x40 bolts and washers.
The M6 bolts must be tightened to a torque of 16 Nm.
•
For Q Series projectors, use M6 x 1.0 x 16 mm bolts and washers and secure with a 5 mm
hex key.
The M6 bolts must be tightened to a torque of 16 Nm.
The Q Series, GS Series 850/700, GS Series 1075, DWU1082-GS, and DWU8902-GS
hardware includes optional adhesive washers than can be used between the frame
mounting plate and the projector to help align the projector for installation.
Refer to the image below for the mounting points on the base plate for each projector series.
Assembling the Christie One rigging frame
Assembling the Christie One Frame Instruction Sheet
4
020-101901-04 Rev. 1 (03-2020)
Copyright
©
2020 Christie Digital Systems USA, Inc. All rights reserved.
