Christie Mirage WQ-L, Руководство пользователя

Страница: 67 / 116

Serial Communication
Mirage WQ-L User Manual 67
020-101372-01 Rev. 1 (04-2014)
Text Parameters
Most data is simply a numerical value, however some messages also require text. Enclose this text
in double quotation marks, as in “Tilt the Wagon”. Use all characters as desired except for the
following special characters shown in the left column below. These special characters require a two-
character combination. See
Sample Messages and their Meaning on page 67.
Sample Messages and their Meaning
Single Projector
Special Text Characters
to get this.... enter this.... Description
\ \\ Backslash
”
\
”
Quote
( \( Left Bracket
) \) Right Bracket
0x0A \n New line - if the text can be displayed on more than one line,
this will set the line break.
\h## Sends one arbitrary code defined by the two hexadecimal
digits ##
Message Format Function Example
(Code Data) SET (set gamma function of main image to
222)
(BGF222)
(Code+Subcode Data) SET (set gamma function of secondary input
to 222)
(BGF+SECD222)
(Code?) REQUEST (what is current gamma function?) (BGF?)
(Code+Subcode?) REQUEST (what is current gamma function
of secondary input?)
(BGF+SECD?)
(Code!Data) REPLY (gamma function is 222) (BGF!222)
(Code+Subcode!Data) REPLY (gamma function of secondary image
is 222)
(BGF+SECD!222)
($Code Data) SET AND ACKNOWLEDGE MESSAGE 
(message processed?)
($BGF222)
(&Code+Subcode Data Checksum) SET WITH CHECKSUM (&BGF222 171)