Christie J Series, Руководство по установке

Страница: 37 / 60

Section 4: Maintenance
J Series 2.0, 2.4, and 3.0 kW Setup Guide 4-3
020-100751-01 Rev. 1 (10-2011)
4. UNSCREW HANDLE
Unscrew the knob on the insertion/removal handle either by hand or using a Phillips screwdriver. See Figure 4-
2 .
F
IGURE
4-2
5. REMOVE THE LAMP MODULE
Make sure the lamp insertion/removal handle hook is located behind the lamp module ( Figure 4-3 ) and pull
lamp module off of electrical terminal by pulling on the insertion/removal handle. Carefully pull on the lamp
module handle to remove the lamp. If the lamp is to be discarded, follow safe disposal/recycling procedures.
F
IGURE
4-3
6. RECORD THE SERIAL NUMBER OF THE NEW LAMP
In the lamp menu, select CHANGE LAMP . This will prompt for the old lamp serial number (if previously not
entered). Enter the new lamp serial number. NOTE: This action is not mandatory, it is recommended for
accurate lamp statistics to be archived.