Configuring system settings
Inspire Series User Manual
45
020-001934-01 Rev. 1 (11-2021)
Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved.
3. Press
ENTER
.
Setting the AC power
Enable or disable this function to power on the projector directly or not when AC power is on.
1. Select
Menu
>
Configuration
>
Power Management
>
AC Power On
.
2. To swap, press
ENTER
.
Setting the time for auto shutdown
Set up a time for automatically turns off the projector after no signal is detected for a preset
number of minutes. If an active signal is received before the projector powers down, the image is
displayed.
1. Select
Menu
>
Configuration
>
Power Management
>
Auto Shutdown
.
2. Select the appropriate time to automatically turn off the projector when no signal exists.
3. To confirm the selection, press
ENTER
.
Setting the sleep timer
Set up a time for automatically power off the projector, after it has been on for a specified amount
of time.
1. Select
Menu
>
Configuration
>
Power Management
>
Sleep Timer
.
2. Select the appropriate time to automatically turn off the projector.
3. To confirm the selection, press
ENTER
.
Enabling high altitude setting
Enable high altitude mode when altitudes >/= 2000 m. The fan operates at high speed to ensure
sufficient air flow for high altitudes; however, the noise level of the projector is increased.
1. Select
Menu
>
Configuration
>
High Altitude
.
2. To swap, press
ENTER
.
Communication mode is the projector’s default standby mode. After performing factory reset,
manually set the standby mode to 0.5W mode to have less power consumption (<0.5W).
