Christie CP2420-Xe, Инструкция по установке и настройке

Страница: 32 / 50

ID Port Description
A HDMI input 1 and HDMI input 2 Type A connector
HDMI v2.0 protocol supporting EDID 1.3 with HDCP v1.4 and 2.2
support
B SDI input 1, SDI input 2, SDI input 3,
and SDI input 4 75 ohm Micro-BNC Connector
Multi-Rate SDI in accordance with SMPTE ST 259 (270Mb/s), ST
292-1 (1.5Gb/s), ST 424 (3.0Gb/s), ST 2081-1 (6Gb/s) and ST
2082-1 (12Gb/s)
C DisplayPort (DP1 and DP2) Accepts digital video data from DisplayPort 1.2 input with HDCP 1.3
support.
D Christie Link port Not used.
E Software-Defined Video over Ethernet
(SDVoE) port Not used.
F USB-C port Connects the projector touch panel.
G Recessed button
• Press the button to transition the projector from Standby mode
to Power ON mode.
• Press and hold the button for 5 seconds to display the IP
address and status information.
• Press and hold the button for 30 seconds to reset the IP
address to the default address.
H USB port Connects to external memory device for import and export of
projector software, configuration files, and status information.
I Ethernet port Connects to the local network and can send C serial
commands.
J Marriage button Used during the IMB marriage setup process. See Activating IMB
marriage (on page 34).
The marriage status LED indicator is located to the right of the
Marriage button. In full power mode, a green LED indicates the
projector is properly married and encrypted content can be
displayed. A red LED indicates marriage is broken and encrypted
content cannot be displayed.
K Fire alarm connection Connects to the Theater Fire Management system for automatic
shut down in emergency situations.
L RS232 communication port Not used.
M GPIO port Connects the projector to external automation or automation
devices.
N 3D sync connector Connects the projector to 3D devices.
Using the Remote user interface (UI)
Use the remote user interface (UI) to access projector functionality.
1. Log into the Remote UI.
Connecting devices and establishing communication
CP2420-Xe and CP4420-Xe Installation and Setup Guide 32
020-103555-01 Rev. 1 (03-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.