Christie CP2420-Xe, Инструкция по установке и настройке

Страница: 18 / 50

Projector components
Learn about the projector components.
O
P
B
C
A
F D E
N J K
G
L M
H
I
ID Component Description
A Projection lens A variety of lenses can be used with this cinema projector.
B Lens mount Optional motorized lens mount.
C Front top cover Provides access to internal components.
B Exhaust duct Extracts heated air from the lamp compartment.
E Vane switch Monitors the amount of airflow.
F Rear top cover Provides access to internal components.
G Back cover Provides access to internal components.
H Touch panel controller
(optional) Used to control the projector.
I LED status indicators
(x2) Provide information about the status of the projector.
J Light engine air filter
cover Provides access to the air filter, which removes particles from the intake air
before it circulates in the front compartment to cool the main electronics.
K Communication panel
cover Provides access to Input connections.
L LVPS/LPS access panel Provides access to the lamp power supply (LPS) connections, AC relay, and
LVPS.
M Adjustable feet (x4) Adjust the tilt of the projector.
P Left access cover Provides access to the air filter.
O Lamp door Provides access to the lamp. The lamp door must remain closed and locked for
normal operation. Lamp replacement must be performed only by qualified
technicians.
N Security locks Prevent unauthorized access to projector components.
Related information
Accessories (on page 14)
Installing and setting up
CP2420-Xe and CP4420-Xe Installation and Setup Guide 18
020-103555-01 Rev. 1 (03-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.