Christie CP2415-RGB, Инструкция по установке и настройке

Страница: 34 / 52

c) Select 3D Sync on the LiteLOC setup page.
d) Adjust the brightness level until you achieve the required brightness while the 3D system
is engaged.
14. To save the new laser file, select Save.
Modifying an existing laser file
Modify the settings in the laser file to change the laser power settings or the maximum expected room
temperature.
When refining the laser power settings, the amount of time required to re-stabilize the projector
depends on the size of the adjustment. For small adjustments to the expected room temperature or
power settings, the projector requires only 1 or 2 minutes to re-stabilize. For larger adjustments, the
projector may require up to 15 minutes to re-stabilize.
1. In the left navigation pane, select Laser Settings > Laser Power/LiteLOC Setup.
2. From the Laser File list, select the laser file to edit.
3. Select the Display White Test Pattern, if required.
4. Adjust the brightness slider as required.
5. To change the white point, select White coordinates box, modify the coordinates, and select
Apply.
Selecting Default returns it to the DCI white point.
6. Once the correct brightness is achieved and the projector has stabilized, to save the new
settings select Save .
Copying existing laser settings to a new file
Copy an existing laser file when you want to create a new file with similar settings.
1. In the left navigation pane, select Laser Settings > Laser Power/LiteLOC Setup.
2. From the Laser File list, select the file you want to copy.
3. To save the new laser file, select Save As
.
4. Type a new name for the laser file and select Save.
5. Adjust the brightness and white settings as required for the new configuration.
Deleting a laser file
Delete a laser file when the configuration is no longer required.
1. In the left navigation menu, select Laser Settings > Laser Power/LiteLOC Setup.
2. Select Display White Test Pattern.
3. In the Laser File list, select the file to delete.
4. Select Delete
.
Managing the light source
Cinema 2K-RGB Installation and Setup Guide–CP2415-RGB and CP2420-RGB 34
020-103259-01 Rev. 1 (10-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.