6. Adjust the value in the Power % field and repeat steps 1 to 4, until the measured luminance is
close, but slightly higher than, the required luminance from the DCI specifications.
Tap Save and return to the MCGD File Setup screen each time an on-screen measurement is
taken, to ensure uncorrected colors are being read.
Always set measured luminance value higher than the specified value prior to color correction,
as color correction decreases light output.
7. Tap Advanced Power Adjust.
8. Individually adjust the Yellow and Blue power settings, returning to the MCGD File Setup
screen after each adjustment to measure the uncorrected color on-screen.
9. On the Light Power/LiteLOC Setup screen, tap Save As.
10. In the Filename field, type a name for the light source file.
11. Tap OK.
Adjusting the image
CP2208-LP Installation and Setup Manual
27
020-102152-03 Rev. 1 (05-2017)
Copyright
©
2017 Christie Digital Systems USA Inc. All rights reserved.
