Christie CineLife+ CP4415-RGB, Инструкция по установке и настройке

Страница: 7 / 19

Installation and setup
Learn how to install and position the Christie Rack Mount Pedestal.
Complete the procedures in the order they are provided.
Initalling the pedestal feet and casters
As a first step, install the pedestal feet and casters.
Warning! If not avoided, the following could result in death or serious injury.
• Two or more people are required to safely lift and install the Christie product.
1. Position the pedestal upside down.
2. Pre-assemble the leveling feet:
a) Thread one M16 lock nut onto each of the four leveling feet.
b) Adjust the space between the lock nut and the head of the leveling foot until it is
approximately 6 cm (2.5 inches).
3. Thread one leveling foot into each of the four corners of the pedestal.
4. Optionally, attach one caster to each of the four corners of the pedestal using four screws for
each caster.
Christie Rack Mount Pedestal Installation and Setup Guide 7
020-100632-04 Rev. 1 (08-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.