Installing a Christie One Mount/Christie One Mount Plus
Installing a Christie One Mount Instruction Sheet
2
020-101410-05 Rev. 1 (09-2016)
Copyright © 2016 Christie Digital Systems USA Inc. All rights reserved.
• Mount the ceiling plate to a structure capable of handling the combined maximum weight of the
projector and the mount.
• The installation of the ceiling mount and supporting structure must meet local building codes.
• Attach the ceiling plate to the supporting structure using all four holes (mounting screws and
bolts are not included with the mount).
• If mounting to ceiling studs, ensure that the mounting screws are anchored into the center of
the ceiling studs. Christie recommends using an edge-to-edge stud finder.
• Be aware of the mounting environment. If drilling and/or cutting into the mounting surface,
always make sure no electrical wires are in the wall.
• To prevent image vibration, Christie recommends not installing the fog filters on HS Series
projectors mounted with Christie One Mount Plus.
Installing the Christie One Mount/Christie One
Mount Plus
Follow these instructions to install a Christie One Mount/Christie One Mount Plus.
1. Refer to the projector’s User manual to determine the correct mount to use.
2. Position and securely fasten the ceiling plate to the ceiling.
3. Insert the calibration device into the ceiling plate and secure with the two setscrews.
4. Position the projector adaptor plate with adjustable arms on the bottom side of the projector.
