Christie CC2, Инструкция по установке и эксплуатации

Страница: 7 / 40

Installation Manual 6838_05
7
1.5 Conditions of use
• This appliance must only be installed
and serviced by an authorised person
(e.g. a licensed electrician) who will
be directly responsible for installing
it according to the manufacturer’s
installation instructions, AS/NZS3000,
and all relevant building and electrical
regulations. For all other countries
the local applicable regulations and
procedures must be followed
• The product is to be connected to
fixed wiring. Isolation switch must
be incorporated in the fixed wiring in
accordance with the national wiring
rules. Isolation switch shall be directly
connected to the supply leads and shall
have a contact separation in all poles
providing full disconnection under
overvoltage category III conditions
• Ensure the appliance is correctly earthed
The appliance must be connected to a
residual current device (RCD) which has
a rated residual operating current not
exceeding 30mA
• A 240V, 15A weather proof general
power outlet (GPO) must be supplied
and located within the structure
housing the appliance
• No part of the appliance, including
the 15A plug, may be modified
without written authorisation from
the manufacturer
• The manufacturer must approve all
repairs conducted under warranty.
Christie will not take responsibility
for any repairs made without prior
authorisation
• This Installation and User Manual
is an integral part of the appliance
and must be kept in its entirety and
in an accessible place for the whole
working life of the appliance. Read this
Installation and User Manual carefully
before using the appliance
• This appliance is suitable for indoor
and outdoor use
• The safety instructions in chapter 1.2
form part of the conditions of use for
this appliance
• The unit must be installed, operated,
and maintained in accordance with the
manufacturer’s Instructions
• Do not modify any part of the appliance
without written authorisation from
the manufacturer
• Ensure there is at least 1200 mm
clearance above the appliance. Do
not locate the barbecue underneath
combustible structures or materials
• The appliance must be installed,
operated, and maintained according to
the manufacturer’s instructions
General information
|