Firmware
Captiva Service Manual
20
020-000867-03 Rev. 1 (05-2018)
6. Click “Program”.
7. When the “Please change the cable to VGA1” appears, click “OK”.
8. When the “Please change the cable to VGA2” appears, click “OK”.
9. When the “Please change the cable to HDMI1” appears, click “OK”.
10. When the “Please change the cable to HDMI2” appears, connect P5 of the fixture with HDMI port
2 of projector by HDMI(M) to DVI(F) cable, then click “OK”.
11. When the EDID program is completed, a message “OK” will appear on the screen.
