Christie CAPTIVA DHD400S, Руководство по обслуживанию

Страница: 13 / 54

Service Setup
Captiva Service Manual 8
020-000867-03 Rev. 1 (05-2018)
3. “OK” will be shown on the screen.
4. Select VGA-2 ADC Calibration > Enter.
5. “OK” will be shown on the screen.
Wheel Index Adjustment
1. Place the projector on a clean horizontal surface.
2. Enter Factory Mode, see Factory Mode on page 4.
3. Select Wheel Index.
4. Check if each color level is well performed.
5. If not, adjust P-Wheel Index and F-Wheel Index by pressing “right” and “left” button.
Re-write LD Hours Usage
1. Enter Factory Mode, see Factory Mode on page 4.
2. Select “LD Fail” then press “Enter” key.
3. Select “LD Hour-Full”, then use “left” and “right” key to re-write “LD Hour-Full”.
4. Select “LD Hour-ECO”, then use “left” and “right” key to re-write “LD Hour-ECO”.
5. Select “LD Hour-Bright”, then use “left” and “right” key to re-write “LD Hour-Bright”.
6. Select “Operating Hour”, then use “left” and “right” key to re-write “Operating Hour”.
7. Press “Menu” key to exit.
Video Performance
CVBS
Test Pattern
64WRGB, full color patten
Inspection Item 64 WRGB & full color pattern should all appear normal.
Test equipment DVD player
Test signal CVBS
Inspection Item Video performance test.
Inspection Distance 1.8 to 2.2 m
Criteria Check any abnormal color, line distortion or any noise on the screen.