Christie 38-804785-01, Руководство по установке

Страница: 2 / 12

- 2 -
- Assembly drawing
- Fine tune tilt adjustments
- Parts list
- Installing the adapter plate
- Horizontal or vertical mounting
- Finding the wood studs behind the wall structure
- Securing the wall brackets to the wall
- Securing the flat panel to the wall mount
Contents
WARNING : Safety precaution measures must be practiced at all times during the installation of this product. Use proper safety gear and
tools for the installation procedure to prevent personal injury.
The entire installation instructions should be fully read and understood, including all of the safety symbols and safety precautions, before
beginning installation. The installation instructions should be read, understood and followed to prevent personal injury or property damage.
Keep these installation instructions in an easily accessible location for future reference.
Indicates that the power plug is to be disconnected from
the power outlet.
Safety precautions must be taken at all times.
Contact Christie for any questions
Warning and caution in general
A secured structure wooden stud wall must always support the weight or load of the flat panel. Always confirm the center of the wood
stud before beginning the installation.
Do not install in locations where there is vibration, movement or danger of impact. Failure to do so could result in flat panel cracking or
falling from the wall causing damage and injury.
Do not install near heater, fireplace, direct sunlight or air conditioning or any other source of direct heat energy. Failure to do so may
result in damage to the flat panel and could cause a risk of fire.
At least two qualified people should always perform the installation work. Injury and damage can result from dropping or mishandling
the flat panel.
Mounting structure recommended wood studs, solid-flat concrete. Use a min dia of 5/16” x 2 ¼” lg concrete wedge anchor
(commercially available). or a min dia of 5/16” x 3” lg wood screws.
The wall structure must be capable of supporting at least five (5) times the weight of the flat panel. If not, the wall must be reinforced.
Proper installation procedure by qualified personnel as outlined in the installation instructions must be adhered to. Failure to do so could
result in serious personal injury.