Christie 130-002103-01, Руководство пользователя

Страница: 25 / 144

Setup Procedures
Matrix StIM™ WQ/SIM WQ User Manual 13
020-100883-01 Rev. 2 (06-2013)
Inputs 1 and 2
Use Inputs 1 and 2 to connect the main and secondary input sources. See Select Inputs on page 40.
The LEDs assigned to each input indicate the following:
GPIO
The GPIO connector provides a method of interfacing a wide range of external 
I/O devices. See GPIO on page 13 and GPIO Port on page 123 for complete details on pin
configuration and how to program the GPIO.
ArrayLOC Network
The ArrayLOC Network connector provides a method of interfacing multiple projectors in an array to
manage preliminary color setup. For details, see
ArrayLOC Network Configuration on page 19 and
ArrayLOC on page 49.
i
Native WQ is required in order to receive a valid DVI-D signal.
S indicator (signal) F indicator (function)
Green: Indicates valid DVI-D source
signal.
Red: Indicates an invalid source signal.
Check the connection and make sure the
source is correct.
Off: Indicates no signal detected on DVI
port. Green: Indicates the input is selected.
Yellow: Indicates which of the 2
inputs is being used as the secondary
input.
Off: Indicates no input is selected.
S F