Christ RVC 2-33 CDplus Скачать руководство пользователя страница 51 | Manualshive

Страница: 51 / 105

background image

Rotational Vacuum Concentrator RVC 2-33 CDplus

with infrared heating

6 Operation

Version 08/2009, Rev. 3.6 of 22/11/2021

• sb-bs

51 / 105

Translation of the original operating manual

Pos : 152 /200 Chris t/370 R VC-BA (ST ANDARDM ODU LE)/ 060 Betrieb/CD plus /060-0050-0020 M odus (außer 2- 18) @ 25\mod_1404985148005_68. doc x @ 187288 @ 3 @ 1

6.5.2

Mode

The mode selection can be activated by pressing the left-hand function key
"mode" in the active values window. The following phases are available:
• Press the left-hand function key "mode". The menu "start with phase…"

appears (see figure).

• Select the desired menu item with the up and down keys.
• Press the right-hand function key "enter" to confirm.

Fig. 24: Selecting the mode

Opening the lid

The lid can only be opened if the rotor is at a standstill. It is not possible to
open the lid during an evaporation process.

DANGER

Hazards of burns on hot surfaces!

During the evaporation process, the housing, the lid and the interior of the
rotational vacuum concentrator can reach surface temperatures of more
than +50°C.

Risk of burns!

Before starting an evaporation process, the vacuum pump and the cooling
trap should warm-up until they reach their respective operating
temperatures.
For this purpose, the warm-up phase can be started. The rotor can
optionally be installed. The warm-up time and the set value for heating can
be selected (see chapter 6.5.3.5 - "Options").
During the warm-up:
• The rotor chamber is preheated - with or without rotor - when the lid is

closed.

• The vacuum pump is switched on.
• • The cooling trap is switched on if it is connected via the control

system with the rotational vacuum concentrator (see chapter 5.6 -
"Connection of a vacuum pump and/or a cooling trap"). If there is no
connection, the cooling trap must be switched on separately.

When the preset warm-up time is over, the control unit displays the
following message:

Fig. 25: Message after the warm-up

• Open the lid and remove the rotor in order to load it with the product or

insert the loaded rotor.

«
...
49
50
51
52
53
...
»

Содержание RVC 2-33 CDplus










































































































Отзывы:

Нет отзывов

Похожие инструкции для RVC 2-33 CDplus

Бренд: Parker Страницы: 54

Бренд: GE Страницы: 24

Бренд: BACtrack Страницы: 13

Бренд: TA Instruments Страницы: 35

Бренд: RASHA PROFESSIONAL Страницы: 11

Бренд: MADRIX Страницы: 24

Бренд: MADRIX Страницы: 28

Бренд: Tascam Страницы: 128

Бренд: ParaBody Страницы: 6

Бренд: Danelec Страницы: 67

Бренд: Jackco Страницы: 6

MCX-C15 - MusicCAST Network Audio Player

Бренд: Yamaha Страницы: 114

Бренд: Twiflex Страницы: 5

Team Agile Color Tune TM16-0

Бренд: GRAU Страницы: 24

Бренд: Cablexpert Страницы: 12

ADB KLEMANTIS AS 1000

Бренд: Osram Страницы: 24

Бренд: Salter Labs Страницы: 2

Бренд: tams elektronik Страницы: 25

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды