Christ RVC 2-18 CDplus Скачать руководство пользователя страница 73 | Manualshive

Страница: 73 / 84

Christ RVC 2-18 CDplus Скачать руководство пользователя страница 73

Rotational Vacuum Concentrator RVC 2-18 CDplus

HCl resistant version

11 Appendix

Version 04/2012, Rev. 2.3 of 03/07/2017

• sb

73 / 84

Translation of the original operating manual



11.3 Brief operating instructions

1.



Switch the system on via the mains power switch on the right side of the
unit.

2.



Switch the vacuum pump and/or the cooling trap on.

3.



Close the lid.

4.



Starting the warm-up phase:
• Enter the set values for the warm-up phase under "menu"



"options"



"timer warm-up" and "temperature warm-up". Confirm

your entries and quit the menu.

•  Press the left-hand function key "mode".
•  Select the "warm-up" menu and confirm.
•  Open the lid when the warm-up phase has ended.
•  Install the rotors and close the lid.

5.



Changing the set values for time, temperature, vacuum and safety
pressure:
•  Select "menu" with the right-hand function key.
•  Select "change set values for manual mode" from the main menu.
•  Select the set value with the aid of the up/down keys and confirm

with the right-hand function key "edit".

• Change the set value with the aid of the up/down keys and confirm

with the right-hand function key "ok".

• Quit the menu with the left-hand function key.

6.



Starting the process "evaporation manual":
•  Open the "mode" menu with the left-hand function key.
•  Select "evaporation manual" using the up/down keys.
•  Start the evaporation process by pressing the right-hand function

key "enter".

The start of the evaporation process starts the following automatic
process run:

• The rotor speed increases (direction of rotation: anti-clockwise)
• At 70% of the selected maximum speed: the aeration valve closes

automatically (to avoid boiling retardation).

• At 80% of the selected maximum speed: the stop valve opens the

connection to the vacuum pump

• Further speed increase until the preselected maximum rotor speed

is reached.

7. Interrupting an evaporation process:

• Press the left-hand function key "mode".
• Select "stop evaporation" and confirm with the right-hand function

key.

Without an interruption, the evaporation process ends after the
preselected time. The following process runs automatically:

• At maximum speed: the stop valve closes the connection to the

vacuum pump, the aeration valve opens; the rotor speed is
maintained for 30 sec (aeration phase, to avoid boiling retardation).

• The rotor decelerates until it is at a standstill. After the standstill of

the rotor the lid can be opened in order to remove the rotors.

«
...
71
72
73
74
75
...
»

Содержание RVC 2-18 CDplus





















































































Отзывы:

Нет отзывов