Industrial PC
Instruction Manual
Document No.: PA10009320
21 / 33
Sep. 2021, Revision 00
1.
Select "Advanced" tab
2.
Select "F81804 Super IO Configuration"
3.
Select "Serial Port1 Configuration"
4.
Make setting in "Device Mode" (RS-422 / RS-485 / RS-232)
5.
Save with keystroke "F4" (confirmation with "Yes")
COM Port configuration
Titanium
In order for RS-232, RS-422 and RS-485 to be recognized on the COM port, the following settings must
be made in the BIOS:
1.
Select "Advanced" tab
2.
Select "F81804 Super IO Configuration"
3.
Select "Serial Port1 Configuration"
4.
Under "F81846 SERIAL PORT1 MODE SELECT" select the mode (RS232, RS422, RS485)
5.
If RS422 or RS485 mode has been selected, settings can be made for "RS422/RS485 Termination"
or "RTS Auto Flow Control
6.
Save with keystroke "F4" (confirmation with "Yes")
Illustration 9: BIOS COM Port Titanium
7.1.2
Set Boot Priority
Set Boot Priority
Argon / Titanium
If you want to boot from a USB device, the following settings must be made in the BIOS:
1.
Select "Boot" tab
2.
Select "Boot mode select" "UEFI"
3.
Open the "Boot Option #1" by pressing the "Enter" key
4.
Select USB device with "Enter"
5.
Save with keystroke "F4" (confirmation with "Yes")
