Chord Red Reference, Руководство пользователя

Страница: 18 / 20

18
Advanced functions
Program Mode - Programming a track selection –
Press the track number (eg. 7) followed by the ‘PROG’ button, then the next track (eg. 4)
followed by PROG, and so on until all tracks have been programmed. To play your
selection, press PLAY.
If you press the PROG button before entering a track number, an error message “ERR” will
appear on the top panel display.
When in program mode, PROGRAM will be shown on the display. The Previous Track,
Next Track and Search functions will all work as normal, but will move around between
the tracks you have programmed.
The STOP button, if pressed once, returns the transport to the beginning of the
programmed selection. If you press STOP a second time then you will exit program mode
and your track selection will be lost.
REPEAT
While the disc is playing, press “REPEAT’ once to repeat the whole disc. REPEAT will
be shown on the front panel display. Previous Track, Next Track and Search will work as
normal in this mode.
Press ‘REPEAT’ again to repeat a particular track; REPEAT1 will now be shown on the
display. If you press Previous or Next track; if you Search past the beginning or end of the
track; or if you press STOP, you will exit repeat mode.
Pressing ‘REPEAT’ for a third time will exit repeat mode.
RANDOM
Press ‘RANDOM’ and the transport will play tracks in random order until all tracks have
been played. RANDOM will be shown on the top panel display.
If you want random play to continue indefinitely, press ‘RANDOM’ and then ‘REPEAT’.
Play will now continue until you press STOP.
Note that the Random control on the Red Reference remote is marked “ SHUF ”.