Chord Red Reference, Руководство пользователя

Страница: 12 / 20

12
Balanced analogue outputs
You need to connect the analogue outputs on the back of the Red Reference to a pre-amplifier,
which in turn will feed a signal to a power amplifier in order to drive your loudspeakers. There is
a pair of balanced XLR outputs, which will drive a 68
Ω load.
connecting to your pre-amplifier
Use the XLR style output connectors to connect the Red Reference to the XLR style input
connectors of any model of Chord pre-amplifier. Ensure that you connect the left output on the
Red Reference to the left input on the pre-amplifier. Also the right output should be connected to
the right input on the pre-amplifier.
RI GH T L EFT
Unbalanced outputs
You need to connect the outputs on the back of your Red Reference to a
pre-amplifier, which in turn will feed a signal to a power amplifier in
order to drive your loudspeakers. All Chord equipment is designed to
be used with balanced connections to maximise audio signal quality.
However there is also a pair of unbalanced outputs as well in case
your pre-amplifier does not have balanced inputs.
connecting to your pre-amplifier
Use the phono style output connectors to connect the Red Reference to
the phono style input connectors of your pre-amplifier. Ensure that you
connect the left output on the Red Reference to your left input on your
pre-amplifier. Also the right output on the Red Reference should be
connected to the right input on your pre-amplifier.
RIGHT
LEFT