Chord Indigo Digital Preamplifier, Руководство пользователя, Страница: 19 / 20

19
Maintenance
Adjusting the settings
Always remember to make any changes to settings with the volume set low or an instant burst of sound could
damage your loudspeaker.
Cleaning
To clean finger marks and other blemishes from your amplifier spray clear glass cleaner onto a soft lint free cloth
and then use the cloth to gently clean your amplifier.
Changing the batteries in the remote control
Simply push the button on the bottom of your remote control to release the battery cover. Replace with four new
AAA batteries as shown inside the battery compartment.
Servicing
There are no user serviceable parts in your Chord amplifier, and it should only be serviced by Chord Electronics
Limited or their expressly approved Service Agents.
Frequently asked questions
why aren’t any of the remote control buttons working?
Press the HIFI button to set up the remote control for Indigo functions.
The range of the Chord digital RF link or Bluetooth is poor.
Check that the antennas are screwed tightly into the rear of the unit. Rotate the antennas to a different position, one
pointing vertically and one pointing horizontally may give the best performance. Move Indigo so that there are no
large obstructions blocking the wireless signal.
why is there humming coming from the loudspeakers?
Check that you’ve earthed the unit. The interconnects need to be properly screened and placed away from mains
cables. Interference can be reduced by using balanced inputs and outputs instead of RCA phono types.
my iPod will not synchronise
Remove the iPod from the dock before activating IPROG mode then replace. Check rear USB connector is connect
to a computer running iTunes.