Chord Electronics
Hugo TT 2 |
Manual
_
For convenience, a branded
infra-red remote control is
included with the device.
The remote will operate up to a
distance of 10 metres with clear
line-of-sight to the infra-red
receiver within Hugo TT 2, which
is located below the looking
glass.
For best operation, do not
operate the Hugo TT 2 within a
cabinet or place other materials/
devices on top of the device.
Selecting optical input via
remote:
A single press of the OPT
button will select the previously
selected optical input. A longer
press of 3-seconds will switch to
the next optical input.
3.1 Getting to know Hugo TT 2
& drivers
3.2 The front panel
3.3 The top panel
3.4 The rear panel
3.5 The remote control
The remote control
3.5
16 // 35
NOTE:
Please only
insert AAA batteries
into the IR remote
control and observe the
correct orientation as
indicated within the remote
control. Failure to do so
could result in non-operation
or battery leakage.
Chord Electronics
Hugo TT 2 |
Manual
_
4.1 Placement
4.2 Connecting Hugo TT 2 to equipment
& Hugo TT 2 power-on sequence
4.0
Setting up
Hugo TT 2
Setting up
Hugo TT 2
4.0
17 // 35
On/off
Select USB
input
Select optical
input (press and hold)
Select BNC
coax 2 input
Increase volume
Mute playback
Increase volume
Cycle through
filter type
Select Bluetooth
input
Cycle through
crossfeed
Select BNC
coax 1 input
Cycle through
LED brightness
