15
Product Specifications
CPM2650
Pre-Amp Section
Unbalanced Inputs:
Video, Radio, Tape1 and Tape2
Balanced Inputs:
Disc 1, Disc 2 are 3-pin female XLR inputs both with RCA Phono style input sockets wired
asymmetrically in parallel
Outputs:
2 x RCA Phono style, gold-plated with Teflon dielectric insulation
Intermodulation Distortion:
-100dB all inputs
Signal to Noise Ratio:
-93dB all inputs
Frequency Range:
2.5Hz – 200kHz (-3dB)
Harmonic Distortion:
10 Hz –91dB, 1kHz –93dB, 10kHz –90dB, 20kHz –87dB
Channel Separation:
10 Hz 90dB, 1kHz 90dB, 10kHz 90dB, 20kHz 85dB
Channel Balance:
0.01dB
Input impedance:
Unbalanced 47kOhms, Balanced 94kOhms (Disc 1 & Disc 2)
Pre-amp Output impedance:
470 ohms
Output Offset:
0mV both channels
Power Amp Section
Output Power:
120W rms per channel @ 0.05% distortion into 8 Ohms
170W rms per channel into 4 Ohms
Dynamic Headroom:
180W rms per channel into 8 Ohms
220W rms per channel into 4 Ohms
Frequency Response:
-1dB, 0.8Hz to 46kHz (8 Ohms)
-3dB, 0.8Hz to 77kHz (8 Ohms)
-1dB, 0.8Hz to 39kHz (4 Ohms)
-3dB, 0.8Hz to 75kHz (4 Ohms)
Signal To Noise Ratio:
Better than –103dB, ‘A’ weighted two thirds
Channel Separation:
-80dB
Output Impedance:
0.03 Ohms
Output Inductance:
2.6mH
Output Connections:
2 x gold plated WBT connections
Slew rate:
70V per
S, 1kHz 20V square wave
Gain:
30dB
Stability:
Unconditional
Dimensions:
420mm (w) x 355mm (d) x 133mm (h)
Weight:
16Kg
CPM3350
Pre-Amp Section
Unbalanced Inputs:
Video, Radio, Tape1 and Tape2
Balanced Inputs:
Disc 1, Disc 2 are 3-pin female XLR inputs both with RCA Phono style input sockets wired
asymmetrically in parallel
Outputs:
2 x RCA Phono style, gold-plated with Teflon dielectric insulation
Intermodulation Distortion:
-100dB all inputs
Signal to Noise Ratio:
-93dB all inputs
Frequency Range:
2.5Hz – 200kHz (-3dB)
Nominal Gain:
All inputs subject to 4 levels of gain (x1, x2, x5, x7)
Harmonic Distortion:
10 Hz –91dB, 1kHz –93dB, 10kHz –90dB, 20kHz –87dB
Channel Separation:
10 Hz 90dB, 1kHz 90dB, 10kHz 90dB, 20kHz 85dB
Channel Balance:
0.01dB
Input impedance:
Unbalanced 47kOhms, Balanced 94kOhms (Disc 1 & Disc 2)
Output impedance:
100 ohms
Output Offset:
0mV both channels
Power Amp Section
Output Power:
220W rms per channel @ 0.05% distortion into 8 Ohms
300W rms per channel into 4 Ohms
Dynamic Headroom:
300W rms per channel into 8 Ohms
520W rms per channel into 4 Ohms
Frequency Response:
-1dB, 0.8Hz to 46kHz (8 Ohms)
-3dB, 0.8Hz to 77kHz (8 Ohms)
-1dB, 0.8Hz to 39kHz (4 Ohms)
-3dB, 0.8Hz to 75kHz (4 Ohms)
Signal To Noise Ratio:
Better than –103dB, ‘A’ weighted two thirds
Channel Separation:
-75dB
Output Impedance:
0.03 Ohms
Output Inductance:
2.6mH
Output Connections:
2 x gold plated WBT connections
Slew rate:
70V per
S, 1kHz 20V square wave
Gain:
30dB
Stability:
Unconditional
Dimensions:
420mm (w) x 355mm (d) x 133mm (h)
Weight:
19Kg
