Chopin RHEO F4, Руководство пользователя

Страница: 16 / 44

Rheo F4
16
User’s manual
07/2015
2.5 Conditions of use
The Rheo F4 must be installed on a flat, clean and tidy bench.
The device must not be installed close to a water source (taps).
The device must not be exposed to sunlight or heat sources.
Ambient temperature must be at least three degrees below the
temperature of the protocol used.
2.6 Start-up of the Rheo F4
The Rheo F4 is a measurement device.
To display and interpret results, it must be connected to a
computer.
Switch on the computer to which the Rheo F4 is connected. Once
the operating system has been launched, start the software by
clicking on the icon:
The software opens:
Check that the device is connected to the computer.