Operation
41
Channel storage MW
Channel storage:
1.
In VFO mode, adjust the required frequency, mode, advanced functional state and other parameters;
2.
Short press[
MENU
] button, rotate the master knob to the page 3 in menu, select
[MW]
function to start channel storage operation;
3.
Rotate the master knob to select the channel number that needs to be stored, short press[
YES ]
button, the channel storage can be completed;
4.
If the current channel has stored information, and then use this channel number to store, the channel information will be cleared and the current
channel information will be saved.
Turn out storage channel:
1
、
If in VFO mode, short press [
V/M
] button on the panel, it will enter the channel mode;
2
、
Rotate the encoder to switch the current channel.
Clear channel storage:
1
、
In channel mode, press the
[MC]
function button to activate the channel clearance function;
2
、
At this point, the channel number starts flashing. Rotate the main knob to the corresponding channel number, short press[
YES ]
button, then the
channel clearance can be completed.
