10
we design
your chocolate
instAllAtion
• Remove all packaging from the machine and remove the vibrating table (
14
) from the back of the machine.
Take off the plexiglass lid (
19
) and make sure nothing prevents the arm from rotating.
• Clean the machine as described on p.15
• Connect the machine by plugging in the electrical plug and assure the voltage and hertz supplied by your
electrical supplier are the same as shown on the identification tag of the machine.
• Activation procedure
- Activate the main switch (
12
)
- Press the
RESET
C
button to activate the heating system
- Press the
RESET
i
button to reset the machine
- Press the
RESET
d
button to activate the rotating arm
Unpack the machine
Plug in
The led is turned on, so the machine
is plugged in correctly.
The vibrating table is at the back
of the machine
Switch on the main switch
in the back
Check the direction of
the mixing arm
Read the manual carefully
by pressing the black button
Correct direction, anti-clockwise
