CHIZHOU JOUSEHOLD MACHINE TOOL CZ1224, Руководство по эксплуатации

Страница: 5 / 23

4
2. STANDARD ACCESSORY
1) Motor pulley 2) Tool post wrench 3) Allen wrench 4)Double end wrench
5) Change gear 6) 3-jaw chuck 7) Center sleeve 8) Screw driver
9) Back plate 10) Center 11) Oil gun 12) Tool box
13) Motor 14) Follow rest 15) Steady rest
16) Face plate
3. OPTIONAL ACCESSORY
4. ELECTRIC SYSTEM
Standard lathe is wired for 220V, 1 phase 50 cycles, other connection can be made as
customers’ requirements.
The electrical system in the lathe has been installed and adjusted in the factory. Generally,
please don’t open the electrical box. Before operating, wire the proper power source to lathe and
connect the ground wire. Turn on the power and check turning direction of spindle, if wrong,
first, turn off the motor and cut off the poser source, then change the wires as the wiring chart.
CAUTION:
1) IF NEED TO CHANGE THE CONNECTION IN ELECTRICAL BOX, PLEASE
1) Stand
2) 4 — jaw chuck
3) Rolling center
4)
Drill chuck