Digital Pumpe-düse Power Chip - Installation Guide
Chiptuning Direct ApS • www.chiptuning-direct.com • [email protected]
Page 2
Important!
Installation of the Digital Pumpe-düse Power Chip module is at your own risk. Furthermore,
Chiptuning Direct ApS accepts no responsibility for defects/damages due to faulty installation or
adjustment of the power chip.
If you have any doubt in connection with installation or daily use we strongly recommend you to
contact a specialist or send an E-mail to our support department [email protected]
Follow the instructions carefully! If you don’t you can potentially influence the operational reliability
of the car. Do not make any changes to the supplied cable kit: The cables are optimised in relation
to impedance and resistance. Therefore the cables are not to be extended, shortened or modified in
any other way.
General installation instructions
1. Turn off the engine
2. Look closely at the supplied cables and determine which cables are to be connected to what. In
the following the correct installation is explained step by step. At this moment the Power Chip is not
to be connected to the cable kit.
Connection of cable kit
Remove the engine shield.
Red
Black
