Figure 2.5
Windows should then display a message indicating that the installation was successful (Figure 2.6). Click "Finish" to
complete the installation for the first port of the device.
If the device is based on the FT2232, the Found New Hardware Wizard will continue by installing the USB Serial
Converter driver for the second port of the FT2232 device. The procedure for installing the second port is identical to
that for installing the first port from the first screen of the Found New Hardware Wizard. This is done automatically if
the driver is Microsoft WHQL certified. If the device is not based on the FT2232, the COM port emulation driver is
loaded as indicated in the following steps.
The Found New Hardware Wizard will launch automatically to install the COM port emulation drivers. As above,
select "No, not this time" From the options and click "Next" to proceed with the installation (Figure 2.7).
Figure 2.6
-
16
