For detecting UTS-112
In this case we may see Port 1 is set at COM18; Port 2 set at COM19…Port 11 set at COM28, Port 12 set at
COM29 for USB to 12-Port RS232 Adapter
Congratulation! You have finished installing the Isolated USB to Serial Adapter successfully.
Note: Some of host computers have built in USB 3.0 hub may not detect USB to Serial devices well. In order
to prevent detecting failure, to connect to USB 2.0 port would be better.
5. Driver Installation
Windows XP Installation Guide
1. Installing Via The Found New Hardware Wizard
If a device of the same type has been installed on your machine before and the drivers that are about to be installed
are different from those installed already, the original drivers need to be uninstalled. Please refer to the Uninstalling
instruction.
Download the latest available drivers from the FTDI web site and unzip them to a location on your PC.
If you are running Windows XP or Windows XP SP 1, temporarily disconnect your PC from the Internet. This can be
done by either removing the network cable from your PC or by disabling your network card by going to the "Control
Panel\Network and Dial Up Connections", right clicking on the appropriate connection and selecting "Disable" from
the menu. The connection can be re enabled after the installation is complete. This is not necessary under Windows
XP SP 2 if configured to ask before connecting to Windows Update. Windows XP SP 2 can have the settings for
Windows Update changed through "Control Panel\System" then select the "Hardware" tab and click "Windows
Update".
Connect the device to a spare USB port on your PC. If the device is based on the FT2232, the Microsoft composite
device driver is automatically loaded in the background. Once the composite driver has been installed Windows
Found New Hardware Wizard will launch. If there is no available Internet connection or Windows XP SP 2 is
-
13
