Chippmann Omega-PhiCS-8 Series, Руководство пользователя

Страница: 14 / 33

CS-8 Series Omega-Phi Rev1.04, Oct. 2015
-12-
36. 1V/Oct. jack (input) – CV-input for calibrated exponential control of the
oscillator frequency (Omega & Phi) with a sensitivity of one octave per
Volt
37. 0.5V/Oct. (non-cal.) jack (input) – CV-input for non-calibrated
exponential control of the oscillator frequency (Omega & Phi) with a
sensitivity of two octaves per Volt
38. Saw (Symbol) jack (output) – saw-tooth (with Shaping) of the Phase
section (Phi), 5 - 10 Vpp
39. Zero Crs jack (output) – Output of the Zero-Cross-Detector of the FM-
linear input, 5 Vpp - this is a special function due to the applied thru zero
architecture
40. Triangle (Symbol) jack (output) – Triangle output of the phase section
(Phi), 10 Vpp
41. Up jack (input) – Synchronization input sets the triangles direction to rise
up with a positive going trigger (0 V -> +5 V) (soft sync)
42. Sinus (Symbol) jack (output) – Sine-wave output of the phase section
(Phi), 10 Vpp
43. Down jack (input) – Synchronization input sets the triangles direction to
fall down with a positive going trigger (0 V -> +5 V) (soft sync)
44. Sub Rectangle (Symbol) jack (output) – 50%-rectangle output (Phi
section) decremented by one octave, 10 Vpp
45. Reverse jack (input) – Synchronization input sets the triangles direction
to its current opposite direction (reverse) with a positive going trigger (0 V
-> +5 V) (soft sync)
7.2 Backside
Fig. 2 shows the back of the module with consecutively numbered elements.