Chippmann CS-8 VCF1E, Руководство пользователя, Страница: 26 / 28

CS-8 Series VCF1E Rev1.2, Feb. 2018
-24-
Fig. 9
The graphs 1 and 3 of Fig. 9 shows the amplitude frequency response of the 4-
stage- and 2-stage-output, where the dry-wet mix is fifty-fifty. Otherwise it
would result into a constant line without that notches at that places, where the
phase rotation of the effect signal is 180° and further 540° relating to the
original input signal. In the wet-dry mix arises the notches by full signal
cancellation.
Independently of the 12 phaser functions the resonance frequencies are
located always at the same position. And the resonance frequency (in filter
mode) is 1 kHz. The actual two resonance frequencies in the phaser mode are
located left and right of it by the factors 0.414 (414 Hz) and 2.414 (2.414 kHz).
Fig. 10 showing once again the first four graphs of Fig. 9 at high resonance.