Chippmann CS-8 COOK, Руководство пользователя, Страница: 11 / 22

CS-8 Series COOK Rev1.3, Feb. 2019
-9-
1. Input controller – attenuates the input signal at jack 6 between 0 and 1
2. Side Chain controller – attenuates the AC input signal at
jack 8
between
0 and 1.
!!ATTENTION: For regular compressor operation this controller is to
set at FULL CW!!
3. Response 4-pos. rotary switch – determines the height of overshoot of
the RMS-converter, which controls directly the VCA
4. A/R Time controller – adjusts the time constant of the RMS-converter for
Attack und Release at the same time
5. Th/Rt controller – adjusts at the same time the level starting point of
compression (Threshold), the Make-up Gain and the Ratio
6. Input jack (signal input) – routes the applied AC signal via
Cont. 1
to the
VCA input of the compressor
7. Thres/Ratio jack (CV input) – wirkt auf die Parameter, die auch mit
Pot. 5
eingestellt werden; 0 V -+5V entsprechen dem Links-/Rechtsanschlag
8. Side Ch jack (signal input) – routes the applied AC signal via
Cont. 2
to
the input of the RMS-converter
9. Time jack (CV input) – adjusts the time constant of the RMS-converter for
Attack und Release at the same time over a wide range as the
corresponding controller
Cont. 4 ; 0 V -+5V corresponds to full CCW to full
CW
10. Out jack (signal output) – provides the compressed output signal
7.2 Back
Fig. 2 shows the back of the module with consecutively numbered elements.