There are 3 harness positions available
that you can select according to child’s height.
The harness height should be adjusted in
such way that the child’s shoulders are at the
same level as the harness coming out from the
back.
(see Fig. 11)
. For group 0+, weight from
newborn to 13kg, you should use the lowest
position. For group I, the mounting height of the
harness straps should be adjusted to the child’s
height, so that child’s shoulders would be at
the same level as the harness coming out of
the backrest.
ADJUSTING THE HEIGHT OF HARNESSES
1. Loosening the harness strap in order to access the metal link (connector) at the back of
child seat.
2. Remove the shoulder straps from the metal link (connector). Pull the shoulder straps
through belt slots on the back of child seat.
3. Then form the front of child seat, re-thread shoulder straps through the desired slots.
Make sure both of the straps go through the slots at the same height.
4. Connect both straps to the metal link (connector) again.
CHANGING THE HEIGHT OF HARNESSES
8
fig. 11
REMOVAL AND RE-ASSEMBLY OF THE HARNESS AND COVER
Carry out the same steps when adjusting the height of the harness, but remove it
completely. Remove the crotch buckle by passing the strap through the seat base and cover.
Remove the cover as well as any fabric accessories such as padding etc.
To reassemble: carry out the same steps in the reverse order.
Ensure that the harness is correctly fitted and that the straps are not twisted or damaged.
